User's Manual

Follow instructions for use.
BF Classification:
- Internally powered equipment
- BF type applied part
- IP22
- Not suitable for use in presence of flammable anesthetic mixture with air or with
Oxygen or nitrous oxide
- Continuous operation with short-time loading
To avoid inaccurate results caused by electromagnetic interference between
electrical and electronic equipment, do not use the device near a mobile phone or
microwave oven. At least keep a maximum output power of 2 W yields and distance
3.3m away from this equipment.
Discard the used product to the recycling collection point according
to local regulations.
Manufacture: HEALTH & LIFE Co., Ltd.
9F, No. 186, Jian Yi Road, Zhonghe District, New Taipei City, Taiwan
www.healthandlife.com.tw
Serial Number
Note
Specifications
RF Type
Bluetooth 4.0 BLE
RF Modulation
GFSK
Data Throughput
0.2Mbps
Expected Delay (Latency
Range) in Wireless (RF)
Communication
The latency time is less than 0.3ms second
from sender to receiver.
Integrity
Channel Quality-Driven Data Rate (CQDDR)
technology increases the effective data rate
and integrity in noisy environments.
Security
AES-128 and application layer user defined
Wireless Operation
Distance
Class 2 (Maximum: 10 meter)
RF Frequency / Need for
Spectrum Management
2402 - 2480 MHz
(allowing for guard bands)
Maximum Limitation
Unlimited
Maximum Permitted
Power
2.5 mW
Proximity of Other
In-band Transmitters
Used in Vicinity
up to 40 bands (2 MHz spacing; centered
from 2402 to 2480 MHz)
Wireless Communication
Profile
GATT – Client and Server
Wireless Coexistence
Support for 802.11 Coexistence
System requirement of
the Bluetooth device
Android 4.3 or above, iPhone 4S or above
27 28