Operation Manual

13
ENGLISH
Do It Yourself Service Chart
Review this table to find do-it-yourself solutions for minor performance problems. Any other
service needed should be performed by an Authorized Service Center.
WARNING – Always turn off and unplug vacuum cleaner before performing
maintenance to the vacuum cleaner. Failure to do so could result in electrical shock
or personal injury.
Problem: Red Caution Light Lit, Loss of Suction or
Overheating of the Motor
Cause: Correction:
Clogged Flat Disc Filter Replace Flat Disc Filter.
Obstructed Hose See instructions (6) under “ “Power Nozzle Does
Not Operate.”
Obstructed Wand Run long wire or a straightened coat hanger
through wand.
Obstruction at neck of Power Nozzle See instruction (4) under “Power Nozzle Does
Not Operate.”
Filter Cone coated with extremely fine dust Empty Dirt Container and replace Filter Cone.
Flat Disc Filter may also need to be replaced.
Problem: Machine will not operate
Cause: Correction:
Plug not connected to outlet, or a faulty one Insert plug firmly into wall outlet or try
another outlet.
Motor overheated and tripped automatic
shut-off
Turn power switch to “O” off and unplug power
cord from wall. Let unit cool. Check for blockage
in attachment. Filter cones or discs may also
need to be replaced.
Damaged switch Call your local FILTERQUEEN
®
Distributor
for service.
Damaged motor Call your local FILTERQUEEN
®
Distributor
for service.
Damaged power cord plug Call your local FILTERQUEEN
®
Distributor
for service.