Operation Manual

14
ENGLISH
Do It Yourself Service Chart
Problem: Power Nozzle does not operate or pick up
Cause: Correction:
Power Nozzle on/off switch is “O” off Move Power Nozzle on/off switch to “I” on.
Hose plugs not connected Review instruction on attaching the Power
Nozzle, making sure all plugs are firmly
connected.
Brush is not turning Make sure all electrical plugs are firmly
connected. Push reset button on back of
nozzle. If this does not work, call your local
FILTERQUEEN
®
Distributor for service.
Obstructed neck Run a wire through opening.
Obstructed wand Remove the hose from inlet and attach to the
exhaust port to blow out clogged debris.
Obstructed hose Remove hose from inlet and attach to exhaust
port to blow out clogged debris.
Worn Brush Call your local FILTERQUEEN
®
Distributor
for service.
Circuit Breaker Tripped Unplug cord and check for an obstruction. After
obstruction is cleared, push reset button on back
of nozzle. If this does not work, call you local
FILTERQUEEN
®
Distributor for service.
Problem: Squeaky rollers on Power Nozzle
Apply liquid wax on axles of rollers.