User manual

Hearth & Home Technologies • 6000BE, 6000BE-IPI • 2024-900 Rev. G • 11/05

HORIZONTAL VENTING

Kit No. H Max. Run

DVP-TRAP 24" (610 mm)

Figure 11. Corner Installation

NOTE: This model is tested and approved to

use 45° elbows in corner installations. Howev-

er, 90° elbows will result in better performance.

The use of two 90

elbows in a corner installation

will affect space requirements (see Figure 2).

3. Match the amount of vertical you have in the sys-

tem with the chart to find the appropriate position

to set the Flue Restrictor (see Figure 9).

1 2 3 4 5

SETTINGS

1 2 3 4 5

Figure 10

4. Center the Flue Restrictor on vent and secure in

place by using two self-tapping screws (see Fig-

ure 10).

5. Reinstall the Exhaust Shield.

- CHART -

Vertical

Top Vent

Rear Vent

4' 1-1

Restrictor

8' 2-2 1-2 1-1

Restrictor

15' 3-3 3-2 2-2 1-2

20' 3-4 3-3 3-3 2-3

25' 3-4 3-3 3-3 2-3

30' 4-4 3-4 3-4 3-3

35' 4-4 3-4 3-4 3-3

40' 5-4 4-4 4-4 3-4

Figure 9.

45-DEGREE

ELBOW

90-DEGREE

ELBOWS