USER MANUAL S12 S12T S12S S12X HEARTWAY MEDICAL PRODUCTS CO., LTD. NO. 6, ROAD 25, TAICHUNG INDUSTRIAL PARK, TAICHUNG. TAIWAN R.O.C.408 PUBLISHED: SEP.6TH, 2012 VERSION: 1 PART NO.
. CONTENTS 1. SAFETY INSTRUCTION…………………………………...……………................................…3 2. ELECTOMAGNETIC INTERFERENCE(EMI)…………….…………………………………7 3. SPECIFICATIONS………………………….…………………..…………….…………………..8 4. PRODUCT DIMENSION…………………………………..……………………...……………9 5. COMFORT ADJUSTMENT……………………….…………………………..………………..10 6. OPERATION OF CONTROL PANEL…………………………………………………………12 7. CHARGING INSTRUCTION….……………………………..………….……………………..22 8. BATTERY INSTRUCTION & MAINTENANCE……………...……………………….…..…24 9. SCOOTER MAINTENANCE & REPAIR…..
SAFETY INSTRUCTION General Always use a seat belt, and keep your feet on the Never operate the scooter while you are under the scooter all the time. influence of alcohol. Never use electronic radio transmitters such as Make sure that there are no obstacles behind you while reserving your scooter. walkie-talkies, or cellular phones. Do not make a sharp turn or a sudden stop while Do not ride your scooter in traffic. riding your scooter.
Do not attempt to climb curbs greater than Do not leave your hands and legs off the scooter limitation show on Technical Specification when driving. Do not ride your scooter during snow in order to Do not allow unsupervised children to play near avoid accident on slippery road. this equipment while the batteries are charging. Warning – Don’t operate your scooter for the first time without completely reading and understanding this user manual. 1. 2. 3. 4.
. 6. 7. 8. 9. 10. 11. 12. 13. 14. 15. 16. 17. 18. 19. 20. There are certain situations, including some medical conditions, where the scooter user will need to practice operating the scooter in the presence of a trained attendant. A trained attendant can be defined as a family member or care professional especially trained in assisting a scooter user in various daily living activities.
2. Get to know the feel of your power scooter and its capabilities. Heartway recommends that you perform a safety check before each use to make sure your scooter operates safely. 1. 2. 3. 4. Inspections prior to using your power scooter: If equipped with pneumatic tires, please check for proper tire inflations. Please check all electrical connections and make sure they are tight and not corroded. Please check all harness connections and make sure they are secured properly. Please check the brakes.
ELECTROMAGNETIC INTERFERENCE (EMI) The rapid development of electronics, especially in the area of communications, has saturated our environment with electromagnetic (EM) radio waves that are emitted by television, radio and communication signals. These EM wave are invisible and their strength increases as one approach the source. All electrical conductors act as antennas to the EM signals and, to varying degrees, all power wheelchairs and scooters are susceptible to electromagnetic interference (EMI).
S12/S12S/S12X - TECHNICAL SPECIFICATIONS 8
. S12/S12S - DIMENSION 9
. COMFORT ADJUSTMENT Adjustments for Seating Comfort: Press the bottom to adjust the height of the headrest. The flip-up armrest height can be adjusted by turning the adjustment dial. Adjust the seat back lever for seating back angle. Turn the swivel lever downwards to rotate the seat. Push the front lever upwards to move the seat forward and backward.
if the transferring speed is more than 30% of the scooter’s maximum speed. Please be noted that the scooter will be at free-wheel mode, when the motor is disengaged. To use the parking brake, you must move and lock the lever into the engaged position! Engaged Disengaged (Free Wheel) Tiller Positioning Press down the lever and move it to your preferred position. The adjustment of rear suspension system: The softness of the rear suspension system is adjustable.
OPERATION OF CONTROL PANEL LCD（Liquid Crystal Display）Power Scooter Control Panel, TN Type Model Functions LCD(Liquid Crystal Display) 1. Power Indicator：Battery remaining capacity and charging indicator (6 squares + Battery Icon) 2. Clock：Hour / Minute / Second display and setting. 3. Speed Sensor：7 Segment display (2.5 digits +1 decimal) + “km/h / mph” symbol 4. High/Low/ Indicated as “H” and “L” symbols 5. Odometer：ODO(99999km max)、TRIP(99.9 max) 6.
：Horn Buttons ：Headlight LED Indicators ：Horn ：SET :MODE ：Back-up Light Right & Left indicator (Green) ，Parking light (Red)，Warning light (Red)，Back-up lamps (Yellow)， Headlight (Blue) LCD Backlight LED (White) Connector CON1: 20PIN AMP Usage Condition ITEM SPECIFICATION Voltage DC24 V Operation Voltage DC 16 ~32 V Storage TEMP. -40℃ ~ 65℃ Operation TEMP.
Operating Instruction １、Speed Sensor and Display ITEM Operation Features SPECIFICATION Speed detection by speed sensor from transaxle with conversion at 1800rpm equal to 60km/h. Tolerance 5~15% (±2%) Digital Range 0.0 ~ 99 Display Switch Button Initial setting at km/h, switch to MPH by MODE and SET buttons ２、High / Low Speed ITEM SPECIFICATION Operation Features (1) Switch High / Low speed by pressing button once.
３、Power Indication ITEM SPECIFICATION Remaining Capacity Voltage (V) Scale Bar (%) 100 ＞ 25.42 (6) 85 (5) 70 (4) Battery ≦ 25.42 ≦ 25.12 Remaining Capacity 55 (3) 40 (2) 30 (1) ≦ 24.78 ≦ 24.42 ≦ 23.88 and Flashing Low-power 20 Warning LED Flashing Warning Flicker Frequency Operation Characters 2 sec. (1) Scale status only decrease, won’t increase. (2) When the remaining capacity was less than 30%, warning sound (“Be-Be” two short sounds) act at 5 seconds intervals.
ITEM SPECIFICATION Remaining Capacity (%) Voltage (V) Scale Bar 40 ＜ 25.44 (2) 55 ＞ 25.44 (3) 70 Charge Indication ＞ 26.18 (4) 80 ＞ 26.92 (5) 90 ＞ 28.5 (6) 100 (7) Increase Frequency Operation Character Remarks 0.5 sec. (1) Scale status only decrease, won’t increase. (2) Take the PIN3(CH3) of charger as determinant signal, enter「Charging Mode」when CH3 grounding (L), not only “KEY ON” or “KEY OFF”.
４、Clock Meter ITEM SPECIFICATION Tolerance (per day) ± 2 sec Initial Setting Value 『Hour：Min』mode :『AM 12:00』 『Hour : Min』 Display range : AM12:00 ~ PM11:59 Setting (12-Hour format) When『Hour』is between 1 and 9 o’clock, displayed at 1~9. ５、Odometer ITEM Operation Features Display Switch Button SPECIFICATION Odometer detected by the signal of Opto Coupler then converts into distance. 「km/h」 means the odometer displayed as kilometer. 「mph」 means the odometer displayed as mile.
６、Headlight Control ITEM SPECIFICATION Take exterior headlight switch as determinant signal. Operation Feature (1) Switch on/off the head light by pressing button on/off simultaneously. (2) LCD backlights turn on / turn off with head light. once, then LED Power Saving Mode When motor stop, the modulation down to 30% (Headlight) When motor act, 100% output power (Headlight) Usage Condition While (a) KEY OFF (b) Power-Saving mode (c) Sleep mode, all functions closed. will turn (1) 2.2V＞WIP＞2.
ITEM SPECIFICATION (1) 2.2V＞WIP＞2.8V ( 50% Half-power ) (2) 2.2V＜WIP＞2.8V ( 100% Full-power ) Determinant Condition Remarks (3) Full / Half power switch at real time. (4) The determination of “Reversing Mode” need to consider the motor direction and panel setting.
11、Power on Self-Test ITEM Initial Status SPECIFICATION When scooter power on, the control panel will go through a self-test routine; the backlight and all LCD segments will be tuned on for 3 seconds, then switch automatically to the general operation mode (ODO). 12、Temperature Sensor ITEM SPECIFICATION Operation Feature Temperature detected by temperature sensor (NTC) from transformation with signal.
14.Buttons ITEM SPECIFICATION Button General (TRIP) “MODE” switch Display Mode Press SET Press MODE Function set for 3 seconds to reset TRIP at “00.0”. and SET simultaneously for more than 2 seconds. to enter “Setting Mode”, then 『Hour：MIN』start flashing. (1) When『Hour』flashing: Press SET to increase of number, then press MODE to enter “Setting Mode” of MODE to enter “Setting Mode” of 『MIN』.
CHARGING INTRUCTIONS Battery Charger Instruction 8A 1. APPEARANCE Power Cord Output Plug to Battery Indicator: Green Flash: Power On Orange Flash: Pre Charge Orange: Charging Green & Orange Flash: Charged 80% Green: Full Charged Red Flash：Defected 2. SPECIFICATION Item BATTERY CHARGER (SWITCHING MODE) Model 4C24080A Output Current(DC) 8A±5% Charging Voltage(DC) 28.8V Floating Voltage(DC) 27.6V Input Current (AC) Input Voltage(AC) 3.8A max.
3. OPERATING INSTRUCTION (1)Make sure the battery charger output voltage is the same as the connecting battery. (2)Plug in the power cord. LED indicates green flash when AC power on. (3)Connect the battery charger to the battery. Start charging; please refer to LED INDICATION 4. LED INDICATION (1)Green Flash：Power on (2)Orange：Charging (3)Orange Flash：Pre charge (4)Green & Orange Flash：Charged 80%。 (5)Green：Full charged(Floating charge)。 (6)Red Flash：Defect 5.
6. CAUTION (1) Before using the battery charger, read all instructions and cautionary markings. (2) Use the battery charger in a well-ventilated area (3) To avoid the risk of injury, charge only lead-acid or gel cell type rechargeable batteries. (4) Please turn off the power after charging Charging Port Important! Always charge your batteries in well ventilated areas. The charger is intended for indoor use only. Please protect it from the moisture.
SCOOTER MAINTENANCE & REPAIR Your power scooter is designed for minimal maintenance. However, like any motorized vehicle it requires routine maintenance. To keep your Vita Scooter for years of trouble-free operation, we recommend you follow the following maintenance checks as scheduled. DAILY CHECKS 1. Visual check on the conditions of tires. 2. Inspect the battery condition meter on the controller to determine if batteries need to be charged. WEEKLY CHECKS 1.
CHECKS: Make sure to keep the controller clean while protecting it from rain or water. Never hose off your power scooter or place it in direct contact with water. Keep wheels free from lint, hair, sand and carpet fibers. Visually inspect the tire tread. If less than 1mm (1/32”), please have your tires replaced by your local dealer. All upholstery can be washed with warm water and mild soap. Occasionally check the seat and back for sagging, cuts and tears. Replace if necessary.
TROUBLESHOOTING & FAULT REPAIR S-Drive controller: Your scooter is fitted with S-Drive controller, which continuously monitors the operating conditions of your scooter. If it detects a problem it will indicate with error message by flashing light on the power ON/ OFF light. You must count the number of the flash, and see the list to check what kind of error has happened according to the number.
CIRCUIT DIAGRAM HEARTWAY’S PATENT A brand new double-A arms suspension system.
S12 - BOM LIST DRAWING 29
WARRANTY DECLARATION Quality/ Warranty Declaration Products are to be fit for purpose and of excellent quality and performance. For valid warranty claims Heartway will, at their discretion, replace/ repair/ refund items mutually agreed to be defective. Heartway’s Warranty as Following: Frame: Two-year limited warranty Controllers: One-and-a-half-year limited warranty Electronic Components and Charger: One-year limited warranty Warranty Exclusion.
