- WattMaster Water Source Heat Pump Operations Manual

Section 3 WattMaster WHP
3-4 Programming
Heat Pump Status
Screens
View Status Only
By selecting the View Status Only menu item, you can
access any heat pump or the loop controller and read all
available temperatures, outputs, and operating conditions
for the selected unit. No passcode is required to access
these status screens, and no setpoints are available to the
user from these screens. To access a unit, enter the Unit ID
you wish to view. The Unit ID is actually two separate
numbers, combined into one value. The first part of the
number contains the Loop Address at which the zone is
located. The second part of the number contains the actual
Board Address.
EXAMPLE: You would like to view the 3rd heat pump
on the 5th loop. Enter 503 as the Unit ID
You would like to view the 12th heat pump
on the 24th loop. Enter 2412 as the Unit ID