User Manual

Page | 23
Grill may be in an area that is too windy.
Flame blows out on low setting
or has uneven heat distribution.
Check for spider webs or insect nest.
Cold grill needs to be preheated for 5 minutes on high setting.
Cold and windy weather will require you to move grill away
from the wind.
Lack of fuel. Check to see cylinder valve is open and cylinder
has fuel.
Low heat with the knob on
“HIGH
Check to see if the fuel hose is bent or kinked.
Make sure the grill area is clear of dust.
Check your gas supply and gas pressure.
If it is only one burner that appears low, make sure the orifice
or burner is clean.
Grill is Too Hot
Excess grease build-up causing grease fires.
Damaged or faulty regulator.
Replace with factory authorized parts.
Cook on a lower temperature setting.
Flame behind control panel or
control knob area.
IMMEDIATELY shut off cylinder valve and allow grill to cool.
Check for spider webs or insect nest.
Gas is leaking from a faulty connection. Tighten connections
with an adjustable wrench and replace damaged parts. Perform
a leak test on all connections before cooking on grill again.
Fire at any connection.
IMMEDIATELY shut off cylinder valve and allow grill to cool.
Gas is leaking from a faulty connection. Tighten connections
with an adjustable wrench and replace damaged parts.
Perform a leak test on all connections before cooking on grill
again.