® Propane Forced-Air Construction Heater HF45G / HF60G / HF125G / HF160G ANSIZ83.7-2017 / CSA 2.14-2017 READ AND SAVE THESE INSTRUCTIONS Carefully read and understand these instructions before assembling, operating, or servicing this heater. You may injure yourself or others if you do not follow the instructions. This manual has been designed to instruct you on the proper manner in which to assemble, maintain, store, and most importantly, how to operate the heater in a safe and efficient manner.
DANGER indicates a hazardous situation which, if not avoided, will result in death or serious injury. WARNING indicates a hazardous situation which, if not avoided, could result in death or serious injury. CAUTION indicates a hazardous situation which, if not avoided, could result in minor or moderate injury.
WARNING: Air Quality Hazard • Do not use this heater for heating human living quarters. • Use of direct-fired heaters in the construction environment can result in exposure to levels of CO, CO2, And NO2 considered to be hazardous to health and potentially life threatening. • Do not use in unventilated areas • Know the signs of CO and CO2 poisoning: • Headaches, stinging eyes • Dizziness, disorientation • Difficulty breathing, feelings of being suffocated. • Proper ventilation air exchange (OSHA 29 CFR 1926.
OPERATING PRECAUTIONS This is a propane, direct-fired, propane heater. This heater was designed and certified as a construction heater in accordance with ANSI Z83.7-2017 / CSA 2.14-2017. The intended use of this heater is the temporary heating of buildings under construction, alteration or repair or for spot heating when the products of combustion are discharged outdoors. Check with your local fire safety authority if you have any questions about the application of this heater.
WARNING: 1. Inspect the heater before each use and at least annually by a qualified service person. DO NOT operate a damaged heater. 2. Inspect the hose assembly prior to each use of the heater. If there is evidence there is excessive abrasion or wear, or the hose is cut, replace the hose prior to operating the heater. Use only the hose specified by PowerFast Products. 3. The hose assembly shall be protected from traffic, building materials and contact with hot surfaces both during use and while in storage.
SPECIFICATIONS MODEL MODEL HL45G R45LP Fuel Consumption Fuel Consumption 2.1 lb/h 2.1 lb/h 1.8/2.3/2.8 lb/h 1.8/2.3/2.8 lb/h Electrical Input 120V/60Hz/0.5A 120V/60Hz/0.5A 120V/60Hz/1.03A 120V/60Hz/1.03A Manifold Pressure 11” W.C. 11” W.C. 8.7” W.C. 6.2” W.C. Rating BTU/h Rating BTU/h HF60G R60LP 45k 45k Electrical Input 40-50-60k 40-50-60k 120V/60Hz/0.5A Manifold Pressure 11” W.C. 120V/60Hz/0.5A 11” W.C. HF125G R125LP 90-110-125k 90-110-125k 4.4/5.1/5.8 lb/h 4.4/5.1/5.
LIGHTING INSTRUCTIONS 1. The Fan will operate automatically when the heater is powered up to an electrical outlet. 2. Allow the heater fan to run for 20 seconds to purge fuel (the first time you use the heater this step is unnecessary). 3. Slowly open the main gas valve at the propane cylinder. 4. Depress and rotate the valve control knob to the “ ” position to ignite the fuel. 5.
SIZE AND CAPACITY OF PROPANE CYLINDERS REQUIRED SIZE AND CAPACITY OF PROPANE CYLINDERS REQUIRED The charts below show the approximate size of the cylinder required for these heaters. To use the chart: 1. Select the lowest air temperature expected (at the bottom of the chart). 2. Move straight up to time of operation desired (left side of chart). 45,000 - 60,000 BTU/h 40# (18kg) CYLINDER 20# (9kg) CY LINDER 60 (16) 40 (4.4) 155,000 BTU/h 125,000 BTU/h 20 (-6.
PARTS DIAGRAM 4 3 2 1 5 6 KEYKEY DESCRIPTION DESCRIPTION MODEL MODEL 1 HF45G, HF60G R45LP, R60LP Assembly 1Motor Motor AssemblyHF125G, HF160G R125LP, R160LP 2 2Fan Fan 3 Handle 4 5 6 3 Handle Multi Bracket Assembly Multi Bracket 4 SparkAssembly Module 5Regulator SparkAssembly Module 6 Regulator Assembly HF45G, HF60G R45LP, R60LP HF125G, HF160G R125LP, R160LP HF45G, HF60G, HF125G R45LP, R60LP, HF160G R125LP R160LP HF45G, HF60G HF125G, HF160G PART PART NO NO 80835 80835 80836 80836
LIMITED WARRANTY PRODUCT GROUP PowerFast warrants this product, to the original retail purchaser only, to be free from defects in material and workmanship for a period of one (1) year from the date of the initial purchase as evidenced on an invoice, canceled check, sales receipt, etc.
GARANTIE LIMITÉE PRODUCT GROUP L’entreprise PowerFast garantit ce produit, seulement à l’acheteur commercial original, d’être sans défaut matériel ou manutentionnaire pour une période d’un (1) an, à partir de la date d’achat initiale, tel que convenu sur la facture, sur le chèque annulé sur le reçu de l’achat, etc.
SCHÉMA DES PIÈCES 4 3 2 1 5 6 Assemblage du moteur Assemblage du moteur 1 DESCRIPTION DESCRIPTION RÉFÉRENCE RÉFÉRENCE multiple 4 4 Poignée 3 3 Ventilateur Ventilateur 2 2 Module d’allumage 5 5 6 MODÈLE MODÈLE NO.DE DEPIÈCE PIÈCE NO.
TAILLE ET CAPACITÉ DES VÉRINS DE PROPANE REQUISES TAILLE ET CAPACITÉ DES BOUTEILLES DE PROPANE REQUISES Les tableaux ci-dessous indiquent la taille approximative de la bouteille requise pour ces radiateurs. Pour utiliser le tableau : Lire la taille de bouteille requise. 3. Déplacez-vous vers le haut vers la durée de fonctionnement souhaitée (côté gauche du tableau). 2. Sélectionnez la température d'air la plus basse prévue (en bas du tableau). 1.
INSTRUCTIONS D'ALLUMAGE Dès que la radiateur se met en marche, maintenez le bouton de commande enfoncé pendant 30 secondes ou bien jusqu'à ce que le thermocouple se 5. Enfoncez et tournez le bouton de commande de la vanne à la position « 4. Ouvrez délicatement la vanne de gaz principale sur la bouteille de propane. 3.
SPÉCIFICATIONS 11 po po CE 11 CE Pression d’admission d’admission Pression 120V/60 V/60 Hz/0,5 120 Hz/0,5AA Entrée électrique électrique Entrée 2.1 lb/h lb/h 2.
1. AVERTISSEMENT : Le radiateur doit être inspecté avant chaque utilisation et au moins une fois par année par un technicien qualifié. NE PAS faire fonctionner un radiateur endommagé. 2. 10. GARDEZ le radiateur dégagé et exempt de tous matériaux combustibles, d’essence et d’autres vapeurs et liquides inflammables. 11. TENIR LES ENFANTS, VÊTEMENTS, ANIMAUX DOMESTIQUES ET Inspectez l'assemblage du tuyau avant chaque utilisation du radiateur.
PRÉCAUTIONS D'UTILISATION Il s'agit d'un radiateur à chauffage direct et alimenté au propane. Ce radiateur a été conçu et certifié pour être utilisé comme radiateur de construction conformément aux normes ANSI Z83.7-2017 / CSA 2.14-2017. Ce radiateur a été conçu pour le chauffage temporaire des bâtiments en construction, la modification ou la réparation ou le chauffage localisé lorsque les produits de combustion sont libérés à l'extérieur.
AVERTISSEMENT : Risque de mauvaise qualité de l'air • N'utilisez pas ce radiateur pour chauffer des logements humains. • L'utilisation de radiateurs à feu direct dans l'environnement de construction peut conduire à une exposition à des niveaux de CO, CO2 et NO2 considérés comme étant dangereux pour la santé et potentiellement mortels. • Ne pas l'utiliser dans les endroits non ventilés.
DANGER indique une situation dangereuse imminente qui, si elle n'est pas évitée, entraînera la mort ou des blessures graves. AVERTISSEMENT indique une situation dangereuse, qui, si elle n’est pas évitée, pourrait causer la mort ou des blessures graves. ATTENTION indique une situation dangereuse, qui, si elle n’est pas évitée, pourrait causer des blessures mineures ou modérées.
® Radiateur de construction à air pulsé au propane HF45G / HF60G / HF125G / HF160G ANSIZ83.7-2017 / CSA 2.14-2017 VEUILLEZ LIRE CES INSTRUCTIONS ET LES CONSERVER Veuillez lire soigneusement et comprendre ces consignes avant d’assembler, d’utiliser ou d’effectuer l’entretien de ce radiateur. Vous risqueriez de vous blesser ou de blesser autrui si vous ne suivez pas ces consignes.