Instructions / Assembly

-4- 200199-01

Your wireless chime has different selectable tunes: Ding (one note), Ding-Dong

(two note), or Westminster (eight note) (Available on selected chimes). The

factory setting is for the Ding-Dong tune (or Westminster, when available). This

tune can be changed by following the instructions below.

• Ding (one note tune)

Inside Sensor: Add a jumper to location 8.

• Ding-Dong (two note tune)

Inside Sensor: Remove jumper from location 8.

Chime: Remove jumper from location 8.

• Westminster (Eight note tune) (Available on selected chimes)

Inside Sensor: Remove jumper from location 8.

Chime: Add a jumper to location 8.

Note: All models have both front and back door tune capabilities. We recom-

mend the back door use the Ding tune and the front door use the Ding-Dong

tune (or Westminster tune, available on selected chimes). You may purchase

any Heath

/Zenith wireless push button for a second entrance.

       

        

reconnecting to power.

12345678

Inside

Sensor

Back of Chime

Tune Setting

Tune Setting (Not

used on all models)

Note: Some models might require the use of

tweezers to remove and replace the jumpers.

Figure 6

Remove screw to

open access door

Tune Settings