Instructions / Assembly

-6- 200199-01

12345678

* Code Settings 1-7

Must Match Both

Sensor and Chime

Inside

Sensor

Remove

screw to open

access door

Back of Chime

4. To change the code, either:

• Addajumper to thesamelocationonboththesensor and the chime

or...

• Removeajumper from thesamelocationonboththesensor and the

chime or...

• Moveajumperonthesensorfromonelocationtoanother.Movethecorre-

sponding jumper on the chime to match the new location in the sensor.

Example: Move jumper at location “5” to location “4” on both the sensor

and the chime.

Note:



Note: Unit will come factory set with jumpers in locations 5, 6, and 7 on the

sensor and on the chime.

The range of the wireless chime can vary with location, temperature, and

battery condition.

Note: Some models might require the use of

tweezers to remove and replace the jumpers.

HeathCo LLC reserves the right to discontinue and to change speciﬁcations at any time

without notice without incurring any obligation to incorporate new features in previously

sold products.

Figure 7