Manual

2
204028-01
MANUAL MODE
AUTO
TEST
ON-TIME Switch at 1, 5,
or 10 minutes
Mode Switching Summary
Flip light switch
off for one second
then back on*
*Ifyougetconfusedwhileswitchingmodes,
turnthepoweroffforoneminute,thenback
on.Afterthecalibrationtimethecontrolwill
beintheAUTOmode.
INSTALLATION
Forbestperformance,mountthextureabout
6feet(1.8m)abovetheground.
WARNING: Turn power off at circuit
breaker or fuse.
1.Removetwonuts.
3.Tightenscrews
ngertight.
2.Remove
MountingPlate.
Thisxturecomeswithauniversalmounting
bracket.Itispre-assembledonthextureto
tthemajorityofjunctionboxapplications.
However,iftheslotsonthemountingplate
donotlineupwiththejunctionboxscrew
holes:
1. Removethexturemountingscrewsfrom
themountingplate.Note:Donotremove
thegroundscrew.
2. Attach ground wire “pigtail” to ground
screwonmountingplate(SeeRecom-
mended Grounding Methodforadditional
information).
3. Flipthemountingplateover.
4.Attachmounting
platetojunctionbox.
WirePath
GroundScrew