Manual
3
204028-01
WirePath
WIRING
One Motion Light
Black
White
Green
or Bare
Light
Fixture
CAUTION: DO NOT connect the RED
wire unless you want to control other
lights from the motion sensor.
Note:Allwiringshouldberuninaccordance
with the National Electrical Code through
conduit or another acceptable means.
Contact a qualified electrician if there is
any question as to the suitability of the
system.
4. Rotatethemountingplatesothewirepath
isontheupperright.Note:Thewirepath
onthemountingplatemustbelocated
asshownbelowtoallowthewiresonthe
backofthexturetopassthrough.
5. Reinstallthexturemountingscrewsand
attachthemountingplatetothejunction
boxasshown.
As Shipped Flipped and
Rotated
WirePath
FixtureScrews
GroundScrew
❒ Twist the junction box wires and the
xturewirestogether asshownbelow.
Securewithwireconnectors.Ifyouhave
ametaljunctionbox,youmaynotneed
thegreen“pigtail”.Ifyouareunsureabout
thegroundingmethod,consultyourlocal
buildingcode.
Two Motion Lights
Black
White
Green
or Bare
Light
Fixture
Light
Fixture
Connectthexturewirestothewiresinthe
junction box. Twist the wires together and
securewithwireconnectors.
Black to black
White to white
Recommended Grounding Method
Useagreenground“pigtail”(notprovided)and
twistoneendtogetherwiththebarexturewire
andtheboxgroundwire.Securewithawire
connector.Securetheotherendofthe“pigtail”
withtheGNDscrewonthemountingplate.