Manual

6
204028-01
TEST 1 5 10 MIN
ON-TIME
LO - M - HI
SENSITIVITY
❒ Set SENSITIVITY to mid position and
ON-TIMEtoTESTposition.
TESTING
❒ Turn on the circuit breaker and light
switch.
❒ SettheSENSITIVITYasneeded.Toomuch
sensitivitymayincreasefalsetriggering.
❒ SettheamountofTIMEyouwantthelight
tostayonaftermotionisdetected(1,5,
or10minutes).
240°
SensorAiming
AdjustmentAngle
❒ Walk throughthe coveragearea noting
whereyouarewhenthe lightsturn on.
Move the sensor head left or right to
changethecoveragearea.
Note:Graspthesensor
onlyasshownandturn
theentiresensor.Any
other method may
damage the sensor.
Do not force it past
the stops.
Least Sensitive Most Sensitive
30ft.
(9.1m)
Maximum Range Maximum
Coverage Angle
The detector isless sensitiveto motion di-
rectlytowardsitandmoresensitivetoacross
motion.
Sensor
Motion
Motion
6ft.
(1.8m)
Avoid aiming the control at:
•Pools of water or objects that change
temperaturerapidly,suchasheating vents
and air conditioners.Theseheatsources
couldcausefalsetriggering.
•Areaswherepets or trafficmaytrigger
thecontrol.
•Nearby large, light-colored objects reflect-
ingdaylightmaytriggertheshut-offfeature.
Donotpointotherlightsatthesensor.
Note: Sensor has a 1
1
/
2
minutewarmuppe-
riodbeforeitwilldetectmotion.When
rstturnedonwait1
1
/
2
minutes.
150°