Operation Manual

HEIDENHAIN CNC PILOT 640 117
3.9 Program Run mode
Activate the additive compensation
Enter the number of the additive compensation
Press the Delete soft key—these compensation
values are deleted
Press the Delete all soft key—all compensation
values are deleted
DELETING ADDITIVE COMPENSATION
 Entered values are added to the existing compensation
values and are immediately effective in the display. The
control moves in the compensation direction by the
compensation value in the following traverse block.
 The compensation values are saved in an internal table
and are available in any program.
 Delete all additive compensation values when you set
up the machine again.