Manualshelf

Operation Manual

ManualsBrandsHeidenhain ManualsOtherCNC PILOT 640
181182183184185186187188189190
184 Teach-in mode
4.4 Turning cycles
Type of machining for technology database access: Finishing
Cycle run
1 Move in transverse direction from the starting point to the contour
starting point X1, Z1
2 Finish defined contour area
3 Return to starting point on paraxial path
4 Move to the tool change point according to the G14 setting
MFS M at beginning: M function that is executed at the
beginning of the machining step.
MFE M at end: M function that is executed at the end of the
machining step.
WP Displays which workpiece spindle is used to process the
cycle (machine-dependent)
Main drive
Opposing spindle for rear-face machining