Operation Manual

HEIDENHAIN CNC PILOT 640 19
3.1 Machine mode of operation ..... 74
3.2 Switch-on / Switch-off ..... 75
Switch-on ..... 75
Monitoring EnDat encoders ..... 75
Traversing the reference marks ..... 76
Switch-off ..... 77
3.3 Machine data ..... 78
Input of machine data ..... 78
Machine data display ..... 80
Cycle statuses ..... 84
Axis feed rate ..... 84
Spindle ..... 84
3.4 Setting up a tool list ..... 85
Machine with turret ..... 85
Machine with multifix ..... 85
Tools in different quadrants ..... 86
Filling the turret list from the database ..... 87
Filling the turret list ..... 88
Tool call ..... 89
Driven tools ..... 89
Tool life monitoring ..... 90
3.5 Machine setup ..... 92
Defining the workpiece zero point ..... 93
Defining offsets ..... 94
Homing the axes ..... 95
Setting the protection zone ..... 96
Defining the tool change position ..... 97
Setting C-axis values ..... 98
Setting up machine dimensions ..... 99
Calibrating the tool touch probe ..... 100
Displaying operating times ..... 101
Setting the system time ..... 102
3.6 Tool measurement ..... 103
Touch off ..... 104
Touch probe (tool touch probe) ..... 105
Optical gauge ..... 106
Tool compensation ..... 107
3.7 Manual mode ..... 108
Tool change ..... 108
Spindle ..... 108
Handwheel operation ..... 108
Manual direction keys ..... 109
Teach-in cycles in Manual mode ..... 109
3 Machine mode of operation ..... 73