Operation Manual

392 ICP programming

5.5 Editing ICP contours

The CNC PILOT offers the following possibilities for extending or

changing a programmed contour.

Superimposing form elements

Press the soft key.

Select the desired form element.

Select the corner to be changed.

Confirm the corner for the form element and enter

the data for the form element.

Adding contour elements

You can add to an ICP contour by entering additional contour

elements that are "appended" to the existing contour. A small square

indicates the end of the contour and an arrow indicates the direction.

Press the soft key

"Append" additional contour elements to the existing contour.