Operation Manual

396 ICP programming
5.5 Editing ICP contours
Changing the paraxial line
When changing a paraxial line, an additional soft key is offered with
which you can change the second end point as well. From an originally
straight line you can make a diagonal in order to make corrections.
Changing the "fixed" end point. By pressing
repeatedly you select the direction of the diagonal.
Shifting a contour
Press the Manipulate menu key. The menu displays
functions for trimming, editing and deleting contours.
Press the menu keys Edit ...
... Contour element.
Select the contour element to be edited.
Present the selected contour element for moving.
Enter the new starting point of the reference element.
Assume the new starting point (= new position). The
CNC PILOT shows the shifted contour.
Confirm the new position for the contour.