Operation Manual

HEIDENHAIN CNC PILOT 640 481
5.16 Loading existing contours
Activate the ICP editor.
Press the Contour list soft key. The ICP editor
opens the window "Selection of ICP contours."
Press the Next file typesoft key until the DXF
contours are displayed (see file extension "*.DXF").
Select the file.
Open the selected file.
Select the DXF layer.
Load the selected contour.
 Blank or finished part contour: Supplement or adapt the
contour, if necessary.
 C-axis or Y-axis contour: Complete the reference data.