Operation Manual

552 Organization mode of operation
8.2 Parameters
... / Type of oversize (RAA) (602215)
16 Longitudinal and transverse oversizes differ – no single
oversizes
144 Longitudinal and transverse oversizes differ – with
single oversizes
32 Equidistant oversize – no single oversizes
160 Equidistant oversize – with single oversizes
... / Equidistant or longitudinal (RLA) (602216) Equidistant oversize or longitudinal oversize
... / Face oversize (RPA) (602217) Transverse oversize
... / Approach/external roughing (ANRA) (602218) Approach strategy:
 1: Move simultaneously in X and Z directions
 2: First X, then Z direction
 3: First Z, then X direction
 6: Coupled motion; X precedes Z direction
 7: Coupled motion; Z precedes X direction
... / Approach/internal roughing (ANRI) (602219) Approach strategy:
 1: Move simultaneously in X and Z directions
 2: First X, then Z direction
 3: First Z, then X direction
 6: Coupled motion; X precedes Z direction
 7: Coupled motion; Z precedes X direction
... / Departure/external roughing (ABRA) (602220) Departure strategy:
 1: Move simultaneously in X and Z directions
 2: First X, then Z direction
 3: First Z, then X direction
 6: Coupled motion; X precedes Z direction
 7: Coupled motion; Z precedes X direction
... / Departure/internal roughing (ABRI) (602221) Departure strategy:
 1: Move simultaneously in X and Z directions
 2: First X, then Z direction
 3: First Z, then X direction
 6: Coupled motion; X precedes Z direction
 7: Coupled motion; Z precedes X direction
... / Transv./longitud. ratio, ext. (PLVA) (602222) Ratio for determination of longitudinal or transverse
machining
... / Transv./longitud. ratio, int. (PLVI) (602223) Ratio for determination of longitudinal or transverse
machining
Parameters: Processing / ... Meaning