Operation Manual

554 Organization mode of operation
8.2 Parameters
... / Machining –ext./transverse (FAP) (602311) Strategy for finishing:
 0: Full-surface finishing with optimum tool
 1: Standard finishing; relief turns and undercuts
machined with a suitable tool
... / Machining –int./transverse (FIP) (602312) Strategy for finishing:
 0: Full-surface finishing with optimum tool
 1: Standard finishing; relief turns and undercuts
machined with a suitable tool
... / Adjacent angle tolerance (FNWT) [°] (602313) Tolerance range for secondary cutting edge
... / Relief cutting angle (FFW) [°] (602314) Minimum angle differential between the contour and
secondary cutting edge
... / Approach/external finishing (ANFA) (602315) Approach strategy:
 1: Move simultaneously in X and Z directions
 2: First X, then Z direction
 3: First Z, then X direction
 6: Coupled motion; X precedes Z direction
 7: Coupled motion; Z precedes X direction
... / Approach/internal finishing (ANFI) (602316) Approach strategy:
 1: Move simultaneously in X and Z directions
 2: First X, then Z direction
 3: First Z, then X direction
 6: Coupled motion; X precedes Z direction
 7: Coupled motion; Z precedes X direction
... / Departure/external finishing (ABFA) (602317) Departure strategy:
 1: Move simultaneously in X and Z directions
 2: First X, then Z direction
 3: First Z, then X direction
 6: Coupled motion; X precedes Z direction
 7: Coupled motion; Z precedes X direction
... / Departure/internal finishing (ABFI) (602318) Departure strategy:
 1: Move simultaneously in X and Z directions
 2: First X, then Z direction
 3: First Z, then X direction
 6: Coupled motion; X precedes Z direction
 7: Coupled motion; Z precedes X direction
Parameters: Processing / ... Meaning