Operation Manual

HEIDENHAIN CNC PILOT 640 559
8.2 Parameters
... / Diameter tolerance/drill (BDT) [mm] (602712) For drill selection
... / Milling (602800) / ...
... / Approach/front face – milling (ANMS) (602801) Approach strategy:
 1: Move simultaneously in X and Z directions
 2: First X, then Z direction
 3: First Z, then X direction
 6: Coupled motion; X precedes Z direction
 7: Coupled motion; Z precedes X direction
... / Appr./lateral surface – milling (ANMM) (602802) Approach strategy:
 1: Move simultaneously in X and Z directions
 2: First X, then Z direction
 3: First Z, then X direction
 6: Coupled motion; X precedes Z direction
 7: Coupled motion; Z precedes X direction
... / Dep./front face – milling (ABMS) (602803) Departure strategy:
 1: Move simultaneously in X and Z directions
 2: First X, then Z direction
 3: First Z, then X direction
 6: Coupled motion; X precedes Z direction
 7: Coupled motion; Z precedes X direction
... / Dep./lateral surface – milling (ABMM) (602804) Departure strategy:
 1: Move simultaneously in X and Z directions
 2: First X, then Z direction
 3: First Z, then X direction
 6: Coupled motion; X precedes Z direction
 7: Coupled motion; Z precedes X direction
... / Safety clearance in infeed dir. (SMZ) [mm] (602805) Distance between starting position and top edge of
object to be milled
... / Safety clearance, milling dir. (SME) [mm] (602806) Distance between milling contour and side of mill
... / Oversize in milling direction (MEA) [mm] (602807) Oversize
... / Oversize in infeed direction (MZA) [mm] (602808) Oversize
... / ExpertPrograms / ...
... / Expert programs (606800) / ... Subprograms adapted to the machine configuration
... / Parameter list Key of the parameter list
... / Parameter lists for expert programs (606900) / ...
Parameters: Processing / ... Meaning