Operation Manual

58 Basics of operation
2.4 Integrated calculator
2.4 Integrated calculator
Calculator functions
The calculator can be selected only from open dialogs in cycle
programming or smart.Turn programming. You can use the calculator
in the following three views (see figures at right):
 Scientific
 Standard
 Equation editor. Here you can type in multiple calculations in
immediate sequence (for example 17*3+5/9).
Using the calculator
 Use the arrow keys to select the input field.
 Use the CALC key to activate and deactivate the
calculator.
 Shift the soft-key menu until the desired function
appears.
 Perform the calculation.
 Press the soft key. The CNC PILOT transfers the value
into the active input box and closes the calculator.
Switching the view of the calculator
 Shift the soft-key menu until the VIEW soft key appears.
 Press the View soft key until the desired view is set.
The calculator remains in effect even after a change in
operating modes. Press the END soft key to close the
calculator.
The GET CURRENT VALUE soft key enables you to
transfer a numerical value from the active input field to the
calculator. The CONFIRM VALUE soft key enables you to
load the current value from the calculator to the active
input field.
Mathematical function Shortcut (soft key)
Addition +
Subtraction -
Multiplication *
Division /
Calculations in parentheses ()
Arc cosine ARC
Sine SIN