Operation Manual

598 Organization mode of operation
8.3 Transfer
Service files
Service files contain various log files used by the service department
for troubleshooting. All important information is summarized in a
services file record as a zip file.
Path and file names of the backup files:
 \data\SERVICEx.zip ("x" stands for a consecutive number)
The CNC PILOT always generates the service file with the number
"1". Already existing files are renamed to the numbers 2 to 5. An
existing file with the number 5 is deleted.
 Creating service files: The information is summarized in a ZIP file
and stored in the control.
 Transmit service files.
Service selection
Press the Transfer soft key (login required).
Open the service data transfer.
Saving service files
You can also create service files without connecting to an external
storage device.
Press the Create service files soft key.
Enter a file name under which you want to save the service file.
Press the Save soft key.
Soft keys for transferring service files
Transmits all marked files from the
control to the remote station.
Deletes all marked files after a
confirmation prompt (login required).
Marks all files in the current window.
Marks or unmarks the file at the
cursor position and moves the cursor
down one position.
Creates a service files data record as
a .zip file.