Operation Manual

640 Tables and overviews
9.4 Compatibility in DIN programs
B-axis and Y-axis machining
Working planes G16 Tilting working plane þ
G17 XY plane (front or rear face) þ
G18 XZ plane (turning) þ
G19 YZ plane (plan view / lateral surface) þ
Tool positioning without machining G0 Positioning at rapid traverse þ
G14 Move to the tool change position þ
G600 Preselect tool þ
G701 Rapid traverse to machine coordinates þ
G714 Insert magazine tool 
G712 Define tool position 
Milling cycles G841 Area milling, roughing þ
G842 Area milling, finishing þ
G843 Centric polygon milling, roughing þ
G844 Centric polygon milling, finishing þ
G845 Pocket milling, roughing þ
G846 Pocket milling, finishing þ
G800 Thread milling in XY plane þ
G806 Thread milling in YZ plane þ
G803 Engraving in XY plane þ
G804 Engraving in YZ plane þ
G808 Hobbing þ
Simple linear and circular movements G1 Linear path þ
G2 Circular arc with incremental center dimensioning þ
G3 Circular arc with incremental center dimensioning þ
G12 Circular arc with absolute center dimensioning þ
G13 Circular arc with absolute center dimensioning þ