Operation Manual

HEIDENHAIN CNC PILOT 640 9
New functions of software 68894x-02
 The "Zero point shift" miscellaneous function was introduced in ICP
(siehe auch „Zero point shift” auf Seite 389)
 In ICP contours, fit dimensions and inside threads can now be cal-
culated using an input form (siehe auch „Fits and inside threads” auf
Seite 384)
 The miscellaneous functions "Copy in linear/circular series, and by
mirroring" were introduced in ICP (siehe auch „Copying a contour
section in linear series” auf Seite 389)
 The system time can now be set using an input form (siehe auch
„Displaying operating times” auf Seite 101)
 The parting cycle G859 was expanded by the parameters K, SD and
U (siehe auch „Parting” auf Seite 267)
 The angle of approach and departure can now be defined for ICP
recess turning (siehe auch „ICP recess turning, radial finishing” auf
Seite 258)
 With TURN PLUS you can now create programs for machining with
an opposing spindle and for multipoint tools (see the smart.Turn and
DIN Programming User’s Manual)
 In the G797 Area Milling function, milling contours can now be
selected (see the smart.Turn and DIN Programming User’s Manual)
 The G720 function was expanded by the Y parameter (see the
smart.Turn and DIN Programming User’s Manual)
 The G860 function was expanded by the O and U parameters (see
the smart.Turn and DIN Programming User’s Manual)