Quick Start User Manual

ManualsBrandsHeli-Max ManualsAir equipmentHMXE08

❑

1. Plug the wall transformer into an AC

outlet. The power indicator light on the wall

transformer will be green and the charge

indicator light will be solid red.

❑

2. Plug the battery into the charger. When

the battery is completely charged, the charge

indicator light will turn green (solid or ﬂ ashing).

Disconnect the battery from the charger.

❑

3. Install (8) AA Alkaline batteries into

the transmitter.

❑

4. Install the Flight Battery and connect

to the ESC. Close the battery cover.

❑

1. Plug the wall transformer into an AC

outlet. The power indicator light on the wall

transformer will be green and the charge

indicator light will be solid red.

❑

2. Plug the battery into the charger. When

the battery is completely charged, the charge

indicator light will turn green (solid or ﬂ ashing).

Disconnect the battery from the charger.

❑

3. Install (8) AA Alkaline batteries into

the transmitter.

❑

4. Install the Flight Battery and connect

to the ESC. Close the battery cover.

™ ™

QUICK START

CHECKLIST

QUICK START

CHECKLIST

WARNING!! The instruction manual must be read completely before operating

the Novus UH-1D Huey. It contains speciﬁ c warnings about safety and use of the

LiPo ﬂ ight battery supplied with the Novus UH-1D Huey. All of these warnings and safety

steps must be read and understood before proceeding to the next step.

WARNING!! The instruction manual must be read completely before operating

the Novus UH-1D Huey. It contains speciﬁ c warnings about safety and use of the

LiPo ﬂ ight battery supplied with the Novus UH-1D Huey. All of these warnings and safety

steps must be read and understood before proceeding to the next step.

Bell, UH-1D Huey, emblems, logos, and body

designs are trademarks of Textron Innovations

Inc. and are used under license by Hobbico

, Inc.

Bell, UH-1D Huey, emblems, logos, and body

designs are trademarks of Textron Innovations

Inc. and are used under license by Hobbico

, Inc.

Summary of content (2 pages)

PAGE 1
™ ™ ™ QUICK START CHECKLIST ™ Bell, UH-1D Huey, emblems, logos, and body designs are trademarks of Textron Innovations Inc. and are used under license by Hobbico®, Inc. WARNING!! The instruction manual must be read completely before operating the Novus UH-1D Huey. It contains specific warnings about safety and use of the LiPo flight battery supplied with the Novus UH-1D Huey. All of these warnings and safety steps must be read and understood before proceeding to the next step. ❑ 1.
PAGE 2
❑ 5. Position throttle stick in lowest position. ❑ 6. Place the model on a flat surface and turn the transmitter on. You will notice that the trim tab indicators are moving and the navigation lights on the helicopter remain solid. This is an indication of the linking process. Allow the helicopter to remain still and do not move the transmitter sticks during the linking process. process. Allow the helicopter to remain still and do not move the transmitter sticks during the linking process.