Quick Start User Manual

ManualsBrandsHeli-Max ManualsAir equipmentHMXE08

❑

5. Position throttle stick in lowest position.

❑

6. Place the model on a ﬂ at surface and

turn the transmitter on. You will notice that

the trim tab indicators are moving and the

navigation lights on the helicopter remain

solid. This is an indication of the linking

process. Allow the helicopter to remain

still and do not move the transmitter sticks

during the linking process.

Two loud tones will be emitted from the

transmitter. After a couple of seconds the

navigation lights will begin ﬂ ashing rapidly.

This indicates that the binding process is

taking place. The tail navigation light will stop

ﬂ ashing and the anti-collision beacon on top

of the helicopter will begin operating. This

indicates that the transmitter and helicopter

have bound properly and the helicopter is

now ready for ﬂ ight. Always step 15 feet

[4.5m] away from the Novus Helicopter

before operating the throttle.

❑

5. Position throttle stick in lowest position.

❑

6. Place the model on a ﬂ at surface and

turn the transmitter on. You will notice that

the trim tab indicators are moving and the

navigation lights on the helicopter remain

solid. This is an indication of the linking

process. Allow the helicopter to remain

still and do not move the transmitter sticks

during the linking process.

Two loud tones will be emitted from the

transmitter. After a couple of seconds the

navigation lights will begin ﬂ ashing rapidly.

This indicates that the binding process is

taking place. The tail navigation light will stop

ﬂ ashing and the anti-collision beacon on top

of the helicopter will begin operating. This

indicates that the transmitter and helicopter

have bound properly and the helicopter is

now ready for ﬂ ight. Always step 15 feet

[4.5m] away from the Novus Helicopter

before operating the throttle.

Inc. HMXE0808 Quick Start

Your Novus helicopter has a safe start feature built in that prevents the motor from

activating unless the collective stick has been lowered to the lowest position. If the

motor won’t run and turn the main blades, please make sure the collective stick is all the

way down and leave it there for a couple of seconds. Then try moving the stick up slowly.

❑

7. Transmitter Controls:

Helicopter Climbs

Helicopter ClimbsHelicopter Climbs

Helicopter Moves Forward

Helicopter Moves ForwardHelicopter Moves Forward

Nose Rotates Left

Nose Rotates LeftNose Rotates Left

Helicopter Moves Left

Helicopter Moves LeftHelicopter Moves Left

Your Novus UH-1D Huey is now ready to ﬂ y. Please refer to the ﬂ ying instructions on page

15 in the manual before operating the model.