Owners manual

559-734-7451 800-367-5480 FAX [phone]
6400 ( R-6400 ) 12/20/06
IMPORTANT NOTE
READ THIS INSTRUCTION AND WARNING
SHEET COMPLETELY BEFORE STARTING
YOUR INSTALLATION
A CLEARANCE OF SEVEN ( 7 ) INCHES IS REQUIRED BEWTEEN THE
OUTSIDE OF THE VEHICLES FRAME AND THE INSIDE OF THE REAR
TIRE, TO AVOID DAMAGE TO THE AIR SPRING AND TO THE TIRE
DOUBLE CHECK THIS CLEARANCE NEEDED.
BEFORE INSTALLING SNOW CHAINS BE SURE TO CHECK FOR
CLEARANCE AROUND THE AIR SPRING TO AVOID ANY DAMAGE.
WHEN LIFTING THE VEHICLE WITH A JACK, BE SURE TO SET THE
PARKING BRAKE AND USE SAFETY STANDS, SUPPORT THE VEHI-
CLE BY THE AXLE TO KEEP THE SUSPENSION LOADED.
WHEN REINSTALLING THE TIRES, CHECK THE MANUFACTURERS
SPECIFICATIONS FOR PROPER LUG NUT TORQUE.
MOVE ANY ELECTRICAL WIRES, FUEL LINES, BRAKE HOSES, OR
OTHER OBJECTS INSIDE THE FRAME TO AVOID DAMAGE BEFORE
DRILLING ANY HOLES ON THE FRAME.
THIS UNIT MUST BE SECURELY MOUNTED AT THE TOP AND BOT-
TOM OF THE AIR SPRING PRIOR TO INFLATION OR DAMAGE TO
THE AIR SPRING WILL RESULT.
BE SURE THE FLAT PLATES INSIDE THE FRAME ARE PLACED BE-
HIND ANY LINES, WIRES, OR HOSES TO AVOID CRUSHING.
PROPER AIR SPRING SETUP HEIGHT IS BETWEEN FIVE (5) AND SIX
AND A HALF (6-1/2) INCHES, TOP AND BOTTOM OF AIR SPRING.