User Manual

INSTALLATION INSTRUCTIONS

FRONT SWAY BAR

P30 COMMERCIAL& MOTORHOME CHASSIS

Thank you for purchasing a quality Hellwig Product.

PLEASE READ THIS INSTRUCTION SHEET COMPLETELY BEFORE STARTING YOUR INSTALLATION.

7162 ( R 7162) 06/02/04

FRAME MOUNTING

FOR BOTH DRIVER &

PASSENGER SIDE

LOWER CONTROL ARM

MOUNTING BOTH DRIVER

& PASSNGER SIDE

559-734-7451 800-367-5480 FAX 559-734-7460

PAGE 1
559-734-7451 800-367-5480 FAX 559-734-7460 INSTALLATION INSTRUCTIONS FRONT SWAY BAR P30 COMMERCIAL & MOTORHOME CHASSIS Thank you for purchasing a quality Hellwig Product. PLEASE READ THIS INSTRUCTION SHEET COMPLETELY BEFORE STARTING YOUR INSTALLATION.
PAGE 2
559-734-7451 800-367-5480 FAX 559-734-7460 TORQUE TABLE BOLT SIZE: 3/8” = 20-30 ft. lbs. – 7/16” = 35-45 ft. lbs. – ½” = 50-70 ft. lbs. – 9/16” = 70-90 ft. lbs. SAFETY: PARK YOUR VEHICLE ON A FLAT LEVEL SURFACE, SET THE PARKING AND CHOCK THE FRONT TIRES. NOTE: THIS KIT CONTAINS THE REPLACEMENT FRONT SWAY BAR AS WELL AS REPLACEMENT POLY BUSHINGS FOR THE REAR SWAY BAR. 1. Locate and remove the factory mounted front sway bar. Take note of the mounting positions of the D-shaped poly bushings. 2.
PAGE 3
559-734-7451 800-367-5480 FAX 559-734-7460 PARTS LIST KIT # 7162 P30 COMMERCIAL & MH CHASIS PART # QTY DESCRIPTION 20217162 1 1-5/8” SWAY BAR 20907162 1 COMPETION KIT # 7162 FRONT SWAY BAR 20800158 111000868 4 4 U-PLATE 1-5/8” POLY BUSHING REAR SWAY BAR 20800003 111000889 125020162 4 4 1 101500244 107302003 102306001 101500071 135007162 7162 ( R 7162) SMALL PARTS BAG # BG-162 8 16 32 8 1 U-PLATE 1-3/4” POLY BUSHING 3/8” X 1-1/2” CAP SCREW 3/8" LOCK NUT 3/8" FLAT WASHER 3/8” X 1-3/4” CAP