User guide

INSTALLATION INSTRUCTIONS

REAR STABILIZER BAR

(2007+ ) 2X4 & 4x4 EXPEDITION

WITH REAR COIL SPRINGS

Thank you for purchasing a quality Hellwig Product.

PLEASE READ THIS INSTRUCTION SHEET COMPLETELY BEFORE STARTING YOUR INSTALLATION

7688 ( R-7688 ) 06/03/2007

559-734-7451 800-367-5480 FAX 559-734-7460

PAGE 1
559-734-7451 800-367-5480 FAX 559-734-7460 INSTALLATION INSTRUCTIONS REAR STABILIZER BAR (2007+ ) 2X4 & 4x4 EXPEDITION WITH REAR COIL SPRINGS Thank you for purchasing a quality Hellwig Product.
PAGE 2
559-734-7451 800-367-5480 FAX 559-734-7460 TORQUE TABLE BOLT SIZE: 3/8” = 20-30 ft. lbs. – 7/16” = 35-45 ft. lbs. – ½” = 50-70 ft. lbs. – 9/16” = 70-90 ft. lbs. SAFETY: BEFORE STARTING YOUR INSTALLATION, BE SURE TO SET PARKING BRAKE AND CHOCK TIRES. NOTE: THIS ANTI-SWAY BAR IS DESIGNED TO REPLACE THE FACTORY INSTALLED SWAY BAR USING THE FACTORY SUPPLIED U-PLATE BOLTS AND END LINKS. 1. Remove the factory installed rear anti-sway bar from factory mounts and end links.