Manual

INSTALLATION INSTRUCTIONS

Rear Stabilizer Bar 3-5” Drop

99-06 1500 SUBURBAN,XL1500,TAHOE,YUKON DENALI,ESCALADE &

AVALANCHE (NEW BODY STYLE W/REAR COILSPRINGS)

Thank you for purchasing a quality Hellwig Product.

PLEASE READ THIS INSTRUCTION SHEET COMPLETELY BEFORE STARTING YOUR INSTALLATION

7850 (R-7850) 07/12/2006

559-734-7451 800-367-5480 FAX 559-734-7460

End LinkAssembly

Bushing

Sleeve

9/16-18 Nut

Sleeve

Bushing

Spacer Block

PAGE 1
559-734-7451 800-367-5480 FAX 559-734-7460 INSTALLATION INSTRUCTIONS Rear Stabilizer Bar 3-5” Drop 99-06 1500 SUBURBAN,XL1500,TAHOE,YUKON DENALI,ESCALADE & AVALANCHE (NEW BODY STYLE W/REAR COIL SPRINGS) Thank you for purchasing a quality Hellwig Product.
PAGE 2
559-734-7451 800-367-5480 FAX 559-734-7460 TORQUE TABLE BOLT SIZE: 3/8” = 20-30 ft. lbs. – 7/16” = 35-45 ft. lbs. – ½” = 50-70 ft. lbs. – 9/16” = 70-90 ft. lbs. SAFETY: BEFORE STARTING YOUR INSTALLATION, BE SURE TO SET PARKING BRAKE AND CHOCK TIRES. NOTE: TO EASE INSTALLATION AND TO PROPERLY ADJUST BAR, THE WEIGHT OF THE VEHICLE MUST BE ON THE SUSPENSION, AS IF DRIVING DOWN THE ROAD. DO NOT RAISE VEHICLE BY FRAME. NOTE: THIS UNIT IS DESIGNED TO REPLACE THE FACTORY INSTALLED REAR ANTI-SWAY BAR.