Datasheet

ManualsBrandsHENGSTLER ManualsPanel-Mount InstrumentsTico-MFH-100-240VAC-TS-2-USB

Display LCD reflective,

Transflective positive: black figures on backlit background

Transmissive negative: white, red or green figures on backlit

ground, 2 lines, 6-digit counter readings & presets;

leading zero suppression, decimal point (up to 4 decimal places)

Digit height 1st line 9.3 mm; 2nd line 7.2 mm

Supply voltage SELV: 12-30 VDC; reverse polarity protected

SELV: 24 VAC, 50/60 Hz ± 10%

115 VAC; 230 VAC, 50/60 Hz ± 10%

100-240 VAC 50/60 Hz ± 10% with switch-mode power supply

Current consumption 12-30 VDC <200 mA,

12-30 VDC <250 mA with backlight

24 VAC <250 mA; including sensor supply

115/230 VAC <50 mA; including sensor supply

90 VAC max. 80 mA; including sensor supply with switch-mode

power supply

Power consumption <5 W

<8 W with switch-mode power supply

Duty cycle 100%

Overload protection External fuse DC: 0.16 AT (IEC 127); DC: 0.2 AT (UL 198)

24 VAC: 315 mAT; 230 VAC: 32 mAT; 115 VAC: 63 mAT

Overload protection External fuse 230 V, 2.5 mAT

Relay outputs DC: 0.16 AT (IEC 127);

DC: 0.2 AT (UL 198)

24 VAC: 315 mAT

230 VAC: 32 mAT; 115 VAC: 63 mAT

Sensor supply Transformer:

AC operation: 12-24 VDC (load dependent), max. 50 mA

Switch-mode power supply:

AC operation: 24 VDC/-5%, max. 115 mA

max. capacitive load = 470 µF

Data storage Non-volatile memory >10 years

Electrical connection Plug-in screw-type connections/terminals

Wire cross-section 1-1.5 mm² with wire-end sleeves

TECHNICAL DATA

GENERAL

Multifunctional counter tico 772/773/774tico 772/773/774

Universally applicable as a tachometer, timer, shift counter, batch counter …

Easy to operate

Four different backlight colours

Intensity of backlighting can now be adjusted

Large, clearly readable 48 x 48 mm display

Input frequency up to 60 kHz

Easy installation via plug-in terminals

Three presets

Summary of content (7 pages)

PAGE 1
tico 772/773/774 Multifunctional counter tico 772/773/774 niversally applicable as a tachometer, timer, shift counter, batch counter … U Easy to operate Four different backlight colours Intensity of backlighting can now be adjusted Large, clearly readable 48 x 48 mm display Input frequency up to 60 kHz Easy installation via plug-in terminals Three presets TECHNICAL DATA GENERAL Display LCD reflective, Transflective positive: black figures on backlit background Transmissive negative: white, red o
PAGE 2
tico 772/773/774 Multifunctional counter tico 772/773/774 Amplitude threshold <2 V and >8 V or <1 V and >4 V at TTL level, Amplitude max. 40 VDC Active edge Programmable Input resistance Approx. 10 kOhm Count frequency Max. 60 kHz; 30 Hz attenuated max. 20 kHz; 30 Hz attenuated in TTL operation Application input max.
PAGE 3
tico 772/773/774 Multifunctional counter tico 772/773/774 COUNTER BATCH COUNTER SHIFT COUNTER Counter mode Input A,B Unidirectional; adding or subtracting; directional input; Differential operation, add/sub; totalizing add/add; phase discriminator single, double or quadruple evaluation Control input Reset, gate Preselect modes Absolute or trailing, range signal/ limit values (signal 1 P 2) Application input/output Output: prescaler out, preset 0 out, direction out Input: additiona
PAGE 4
tico 772/773/774 Multifunctional counter tico 772/773/774 ENVIRONMENTAL REGULATIONS, SAFETY PROVISIONS Accuracy of the timer Time base: ± 30 ppm Start/Stop-point in time: 16 µs/16 ms (not damped/damped) Resolution: 100 µs = 100 ppm Overall tolerance = Displayed resolution + tolerance of timebase = 130 ppm Safety provisions EN 61 010-1/IEC 61010-1 Protection class II; EN 61010-1/IEC 61010-1 Pollution degree V 2, EN 50178 EMC interference compatibility EN 61326-1 industrial environment** EMC em
PAGE 5
COUNTING FREQUENCY AS A FUNCTION OF SIGNAL VOLTAGE 80 Counting frequency [kHz] 70 60 PNP-H 50 NPN-H 40 30 20 10 0 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 Signal voltage [V] The counting frequencies were determined using a signal generator with an output resistance of 50 ohms.
PAGE 6
tico 772/773/774 Multifunctional counter tico 772/773/774 CONNECTION OPTIONS Data sheet tico 772/773/774 VDC 2 relays/2 transistors VDC 1 relay/2 transistors VAC Transformer 2 relays/2 transistors VAC Transformer 1 relay/2 transistors VAC Switch-mode power supply 2 relays/2 transistors VAC Switch-mode power supply 1 relay/2 transistors USB interface on Tico 773 RS232 interface on Tico 774 19/07/2012 All rights reserved Page 6 of 7
PAGE 7
tico 772/773/774 Multifunctional counter tico 772/773/774 ORDER INFORMATION Display Relays 12-30 VDC 24 VAC 115 VAC 230 VAC 100-240 VAC Tico 772 LCD reflective 1 0 772 101 0 772 111 0 772 121 0 772 131 0 772 141 LCD reflective 2 0 772 112 0 772 122 0 772 132 0 772 142 Transflective positive Transflective positive Transmissive negative Transmissive negative Transmissive red Transmissive red Transmissive green Transmissive green 1 0 772 102 0 772 201 - - - 0 772 241 2 0 772 202