Corp. Refrigerator User Manual

Model CMC/CMR-103,104,105,106,107
2-2. UNPACKING
Take care when moving the fryer to prevent personal
injury or damage to the refrigeration system. The
CMC-107s weigh over 700 lbs. (318 kg).
4. Peel off any protective covering from exterior of the cabinet.
5. Install the grids into unit.
6. Unpack sliding thermal doors and side glass. Install on rear
and side of unit.
7. Your cold top is now ready for operation.
2-3. ELECTRICAL The Cold Top is available as a 120 VAC, 60 Hz. or 230VAC,
50 Hz., single phase unit, both for domestic and international use.
The data plate, located beside the power cord, specifies the correct
electrical supply. The Cold Tops are shipped with cord and plug,
and requires a grounded receptacle with a separate electrical line
protected by a fuse or circuit breaker of the proper rating. Position
the unit so the power cord receptacle is accessible.
To avoid electrical shock, this appliance must be
equipped with an external circuit breaker which will
disconnect all ungrounded (unearthed) conductors.
Refer to the table below for electrical ratings:
Model No. Volts Amps Phase Max. Fuse Size
CMC-103 120 7.7 1 15
CMC-103 230 4.5 1 15
CMC-104 120 7.7 1 15
CMC-104 230 4.5 1 15
CMC-105 120 8.6 1 15
CMC-105 230 6.0 1 15
CMC-106 120 8.6 1 15
CMC-106 230 6.0 1 15
CMC-107 120 9.5 1 15
CMC-107 230 7.7 1 15
(Continued)
2-2 303