Instructions / Assembly

ManualsBrandsHenry ManualsKitchen287SF 55 Gal. Solar-Flex White Roof Coating

TECHNICAL DATA SHEET

HE287SF - 287 SOLAR-FLEX WHITE ROOF COATING

Last Rev Date: 07/13/2015

Physical Properties

Maximum VOCAppearance

Smooth White <50 g/l

Specific Gravity @ 77º F (25ºC)

1.24

Near Normal Emittance (LEED) Application Temperature

50ºF and rising 0.94 (ASTM E408)

Tensile Strength Film (Initial)

210 psi (ASTM D-2370)

pHBrookfield Viscosity

15,000-20,000 cPs, 5D@20 RPM 9.0

Thermal Emittance

88% (ASTM C1371)

RecoveryColor

White 97.3% (ASTM D2370)

Water Absorption

1.21 (ASTM D471)

Reflectance Drying Time @ 50% R.H. 68ºF

(20ºC)

2.5 hr 86% (ASTM C1549)

Water Vapor Permeance

8.1 (ASTM E-96)

Solids By WeightElongation (Initial)

300% (ASTM D2370) 48-52%

Weight Per Gallon

10 -10.4 lbs (ASTM D1475)

Flash Point

>212ºF (ASTM D56)

Approvals and Certifications

Henry stipulates that these rating were determined in accordance with the applicable Cool Roof

Rating Council procedures. Rated Product ID - 0620-0007.

As an ENERGY STAR® Partner, Henry has determined that this product meets the ENERGY STAR

guidelines for energy efficiency.

Consult Henry Representative for specific assembly ratings and requirements.

See Henry Roofing Manual for detailed Roofing, Reroofing, and Roof Maintenance & Restoration

specifications.

Description

HE287SF - 287 SOLAR-FLEX WHITE ROOF COATING is a premium, elastomeric, water-based acrylic latex coating.

Properly applied, it is highly resistant to disbonding, chalking, mildew, and discoloration. HE287SF - 287 SOLAR-FLEX

WHITE ROOF COATING

provides the following benefits:

Reflects over 85% of sun's heat and U.V

Bright white with excellent "hide"

Lowers roof and interior temperatures

Prolongs roof life

Reduces air conditioning costs

Henry Company 909 N. Sepulveda, Ste 650, El Segundo CA 90245-2754

Technical Services Phone: (800) 486-1278 - Email: techservices@henry.com

The Henry Company is the parent company of Bakor, Inc.

www.henry.com

TECH HE287SF

Summary of content (3 pages)

PAGE 1
TECHNICAL DATA SHEET HE287SF - 287 SOLAR-FLEX WHITE ROOF COATING Last Rev Date: 07/13/2015 Physical Properties Appearance Smooth White Application Temperature 50ºF and rising Brookfield Viscosity 15,000-20,000 cPs, 5D@20 RPM Color White Drying Time @ 50% R.H. 68ºF (20ºC) 2.5 hr Elongation (Initial) 300% (ASTM D2370) Flash Point >212ºF (ASTM D56) Maximum VOC <50 g/l Near Normal Emittance (LEED) 0.94 (ASTM E408) pH 9.0 Recovery 97.3% (ASTM D2370) Reflectance Specific Gravity @ 77º F (25ºC) 1.
PAGE 2
Coverage Approximately 100 sq. ft. per 1 gallon, applied as two coats. Surface Preparation 1. Clean Surface must be clean, dry and sound. Sweep or rinse to clear dust, dirt and residues. Scrub areas where water ponds with detergent and water and rinse well. For newly-applied asphalt emulsion, proceed as soon as it has cured, normally 1-7 days. 2. Repair: Inspect area to be coated.
PAGE 3
Caution WARNING: Causes skin irritation. Causes serious eye irritation. May cause respiratory irritation. Prevention: Wash thoroughly after handling. Avoid breathing mists and sprays. Use only outdoors or in a well-ventilated area. Wear protective gloves and eye protection. Response: IF ON SKIN: Wash with plenty of soap and water. If skin irritation occurs; Get medical advice or attention. Take off contaminated clothing and wash it before reuse. IF IN EYES; Rinse cautiously with water for several minutes.