Brochure

sta put
Plumbers Putty
SPEC SHEET #S00022
Hercules Chemical Company, Inc.
111 South Street, Passaic, NJ 07055-9100
Phone: [phone] • Fax: [phone]
e-mail: [e-mail]
http://www.herchem.com
©2000 JZRZ
APPROVALS AND LISTINGS
SPECIFIC USES
For Delivery by Fax Call 1-800-942-4636
Internet See MSDS section of
www.herchem.com
Mail Contact Hercules at address below or
any Hercules representative
SPECIFIC APPLICATIONS**
Professional non-hardening putty for sealing and caulking.
PHYSICAL PROPERTIES
Specific Gravity: 2.15 to 2.35
Solubility in water: Insoluble
Appearance/color/odor: Beige color with very mild
vegetable oil odor
WARNINGS OR CAUTIONS
DO NOT USE STA PUT IN DIRECT CONTACT WITH
MARBLE, GRANITE OR OTHER POROUS STONE,
CERAMICS OR MANUFACTURED SUBSTITUTES.
Consult manufacturer. On natural materials (stone, marble,
etc.), spray or brush contact area with clear acrylic lacquer
and allow to dry. This prevents discoloration which might
occur from putty components diffusing through the porous
fixture. Then apply
Sta put.
DIRECTIONS FOR USE
Take out required amount and form the putty to the approxi-
mate shape needed. Sta put can be rolled between the
palms of your hands to form a long cord-like shape. Lay out
on the surface being sealed, overlapping the ends. Place the
fixture over the bead, attach and tighten down the fasteners
for the fixture. Enough
Sta put should be used so that some
excess putty is squeezed out from all around the fixture
ensuring that a continuous seal has been made. Wipe off the
excess; no additional sealer is needed. Use this method for
setting bowls, fixtures, faucets, basin cocks, strainers, plugs,
sink frames, toilet perimeters and other sealing and caulking
applications.
MATERIAL SAFETY INFORMATION
FOR MORE INFORMATION ON THIS PRODUCT,
REQUEST MATERIAL SAFETY DATA SHEET (MSDS) #22.
This product is not classified as hazardous as defined by
OSHA 29 CFR 1910.1200.
HMIS Hazard Warning 0-0-0-A
INGREDIENTS CAS#
NJ - T.S.R. #31348300 5005P, 5007P, 5008P, 5009P, and
5019P
** For special applications which may not be covered on this
or other Hercules literature, please contact Hercules
Technical Services Department by phone at
1-800-221-9330 or send a fax to 1-800-333-3456.
TM
Meets Federal Specification TT-P-1536.
Used for setting bowls, fixtures, faucets, basin cocks,
strainers, plugs, sink frames as well as many other sealing
and caulking jobs.