Safety Data Sheet

Explosion-proof general and local exhaust ventilation. Good general ventilation (typically 10 air
changes per hour) should be used. Ventilation rates should be matched to conditions. If
applicable, use process enclosures, local exhaust ventilation, or other engineering controls to
maintain airborne levels below recommended exposure limits. If exposure limits have not been
established, maintain airborne levels to an acceptable level. Eye wash facilities and emergency
shower must be available when handling this product.
Appropriate engineering
controls
Individual protection measures, such as personal protective equipment
Face shield is recommended. Wear safety glasses with side shields (or goggles).
Eye/face protection
Skin protection
Wear appropriate chemical resistant gloves.
Hand protection
Wear appropriate chemical resistant clothing.
Other
If engineering controls do not maintain airborne concentrations below recommended exposure
limits (where applicable) or to an acceptable level (in countries where exposure limits have not
been established), an approved respirator must be worn.
Respiratory protection
Wear appropriate thermal protective clothing, when necessary.
Thermal hazards
When using, do not eat, drink or smoke. Always observe good personal hygiene measures, such
as washing after handling the material and before eating, drinking, and/or smoking. Routinely wash
work clothing and protective equipment to remove contaminants.
General hygiene
considerations
9. Physical and chemical properties
Appearance
Liquid.
Physical state
Translucent liquid.
Form
Clear.
Color
Solvent.
Odor
Odor threshold
Not available.
pH
Not available.
Melting point/freezing point
Not available.
Initial boiling point and boiling
range
151 °F (66.11 °C)
Flash point
-4.0 °F (-20.0 °C)
Evaporation rate
5.5 - 8
Not available.
Flammability (solid, gas)
Upper/lower flammability or explosive limits
Flammability limit - lower
(%)
1.8
Flammability limit - upper
(%)
11.8
Explosive limit - lower (%)
Not available.
Explosive limit - upper (%)
Not available.
Vapor pressure
145 mm Hg @ 20 C
Vapor density
2.5
Relative density
0.91 +/- 0.02
Solubility(ies)
Solubility (water)
Negligible
Partition coefficient
(n-octanol/water)
Not available.
Auto-ignition temperature
Not available.
Decomposition temperature
Viscosity
Other information
Bulk density
VOC (Weight %)
Not available.
80 - 500 cP
7.6 lb/gal
<510 g/l SCAQMD 1168/M316A
SDS USHERCULES PVC Clear Cement Regular Body, Medium Set 927040
Version #: 01 Revision date: 12-8-2017 Issue date: 05-27-2015
5 / 10