Operation Manual

VirtualDJ 5 DJC Edition
g) Flanger
The flanger consists of adding a cycle of stretching and compressing on some
frequencies of the music while keeping the other frequencies unchanged, so
that you keep the tempo and the tone of the music but change its sound.
Flanger is very frequently used in techno music.
To enable the flanger, press the Flanger button; to stop it, press the button
again.
Changing the flanger
You can change the flanger when you press the Flanger button and turn the jog
wheel at the same time:
- the right jog wheel sets the delay of the flanger,
- the left jog wheel sets the frequency of the flanger.
These 2 settings are represented as rotating knobs below the 6 buttons in the
VirtualDJ 5 DJC Edition skin.
h) Flipping double
Flipping double repeats the music with half a beat delay: this sounds similar to
as if you had 2 turntables that were playing the same track, one playing half a
beat behind the other, and you moved the cross fader quickly to the second
turntable at the end of each beat, creating a repetition of the rhythm.
i) Mic Flanger
Mic Flanger adds a flanger effect on the microphone input. When you enable
this function, the microphone input replaces the audio track on Deck A so you
cannot use this function in talk-over mode, as you cannot hear the music file
loaded on Deck A when Mic Flanger is enabled.
To restore playback of the track loaded on Deck A, you must switch off the Mic
Flanger function by pressing the Mic Flanger button again.
32/34 - User Manual