Operation Manual

VirtualDJ 5 DJC Edition
j) Mic Chorus
Mic Chorus adds a chorus effect on the microphone input. When you enable
this function, the microphone input replaces the audio track on Deck A so you
cannot use this function in talk-over mode, as you cannot hear the music file
loaded on Deck A when Mic Chorus is enabled.
To restore playback of the track loaded on Deck A, you must switch off the Mic
Chorus function by pressing the Mic Chorus button again.
k) Mic Reverb
Mic Reverb adds a reverberation effect on the microphone input. When you
activate this function, the microphone input replaces the audio track on deck A
so you cannot use this function in talk-over mode, you cannot hear the music file
loaded on deck A when Mic Reverb is enabled.
To restore the playback of the track loaded on deck A, you must switch off the
Mic Reverb function by pressing the Mic Reverb button again.
l) Mic Voice Pitch
Mic Voice Pitch lets change the pitch of the microphone input. When you
enable this function, the microphone input replaces the audio track on Deck A
so you cannot use this function in talk-over mode, as you cannot hear the music
file loaded on Deck A when Mic Voice Pitch is enabled.
To restore playback of the track loaded on Deck A, you must switch off the Mic
Voice Pitch function by pressing the Mic Voice Pitch button again.
Changing Mic Voice Pitch
You can change the voice pitch when you press the Mic Voice Pitch button and
turn the right jog wheel at the same time:
- turning the jog wheel jog counterclockwise sets a lower tone voice,
- turning the jog wheel jog clockwise sets a higher tone voice.
User Manual – 33/34