User Guide

MC26 Online Manual Eng Spa 081621
Inspection
After unpacking your cooler, carefully inspect for any dam-
age that may have occurred during transit. Inspect for
loose, missing or damaged parts. Note: wheels & hardware
are located in ice door compartment on top of cooler.
Contents: Evaporative Cooler (1), Hose Adapter (1), Caster
Wheels (4), Ice Packs (2), Remote Control (1).
Visit Hessaire.com to request replacement parts if any of
these items are missing.
1 Install Casters: Locking in front
3 Plug In To Power
Supply
2
Note: Media pads may have a slight odor upon initial start
up but will go away with continued use.
Lay Cooler Down
Gather Casters, Push In To Install
A
B
C
Remove And Freeze
Ice Packs Prior To Use
Quick Start
4 Fill Cooler
5 Turn On
& Enjoy
2 Install Hose
Adapter (Not For
Indoor Use)
Features
Remote Control Functions:
Pump
Timer
Power
Swing
3
Fan Speed
Control Panel For MC26A: With Humidity Control
Swing Button: Press to operate oscillation feature.
Timer Button(light on when engaged): Press to select
desired run time. All features will stop running when time
expires.
Pump Button: Pump functions continuously when light is on.
Set humidity level by pressing and holding the pump button
for 2 seconds. The setting range is 50% to 90% RH. Each
press of the button will increase RH by 5%. Once the de-
sired RH is adjusted, the value will flash for 5 seconds. The
setting is automatically activated after 5 seconds.
Fan Button: Controls 3 different fan speeds
Power Button: Green light on allows all functions to operate.
When the red light is on, functions will not be operable.
Ice pack compartment for
added cooling effect.
Unit includes 2 ice packs.