User Manual

GAS CONNECTION - NATURAL GAS (NG)

NOTE: To ensure proper heating performance of this appliance, verify that the gas line supply

pressure is adequate (7.0” WC supply pressure is preferred) to maintain 4.0” WC manifold

pressure. Use a minimum 1/2” ID flex hose to prevent gas starvation. Ensure that the service

pipe supplying the side burner is fitted with a shut-off valve conveniently positioned and easily

accessible as an emergency gas shut-off.

Your Hestan side burner for use with Natural Gas is supplied with its own regulator which MUST

NOT be removed. If this regulator needs to be replaced, use only the type specified by Hestan

for this appliance.

To connect the regulator / hose assembly follow the next steps:

1. Locate the regulator mounted underneath your side burner.

2. Connect gas supply using a minimum 1/2” diameter flexible (semi–rigid) stainless steel gas

hose, no more than 48” in length. If you plan to inter-connect the side burner with your

Hestan Grill, be sure to use the included fittings and a flexible hose as short as possible to

make the connection. The hose as well as the connectors must comply with the

Standard for

Connectors for Outdoor Gas Appliances and Manufactured Homes, ANSI Z21.75 • CAS 6.27

and suitable for outdoor installation. Use the appropriate thread sealant on all connections.

3. Proceed to LEAK TESTING section.

GAS CONNECTIONS

(continued)