Instructions/Assembly Guide

hestanoutdoor.com

HESTAN RESIDENTIAL INSTALLATION MANUAL FOR BEER DISPENSING EQUIPMENT

Insert end of the snorkel up into the tower and screw

air scoop mounting bracket into vacated holes above

the fan.

Install the Air Scoop Kit. Start by removing the upper set

of screws located above the fan on the back wall of the

cabinet.

Assemble components from the kit as follows – Insert

black snap bushing into air scoop mounting bracket,

then insert one end of the air snorkel through the snap

bushing. A zip tie can be inserted behind the mounting

bracket to keep the tube in place.