Use and Care Guide
ManualsBrandsHestan ManualsBuilt-In Dishwashers24 Inch Fully Integrated Built-In Dishwasher with 13 Place Settings, 10 Wash Cycles, Full-Sized 3rd Rack, 42 dBA Quiet Operation, Double Axial Washing System™, AquaLeak Detection Technology™, Marquise Accented™ Handle, Auto Door-Open Drying, Interior Ligh
FEATURES AND CONTROLS
CLEANING AND USER MAINTENANCE
©2018 Hestan Commercial Corporation
27
(continued)
ADJUSTING THE UPPER RACK
GENERAL WARNINGS AND RECOMMENDATIONS
be level on both sides.
To raise the rack, lift it with the two handles to the rst or second catch,
depending on the height required. To lower the rack, pull up on the two release
levers. This is also possible with the rack loaded, but in this case, when lowering
the rack it should be held rmly to avoid hitting other items below it.
The upper rack can set in three different positions on both sides. The rack must
BEFORE CARRYING OUT ANY WORK, ALWAYS DISCONNECT
NEVER USE ABRASIVE AND/OR CORROSIVE DETERGENTS TO
Clean the outer surfaces and door liner of the dishwasher regularly using a soft
cloth moistened with a neutral detergent (non-abrasive and/or corrosive)
suitable for painted surfaces. Clean the door gaskets with a damp sponge.
Periodically (once or twice a year) it is advisable to clean the liner and gaskets,
using a soft cloth and water to remove any deposits.
Do not clean the controls with too much water as it may leak onto the
electrical components and damage them.
After cleaning, dry the appliance with a soft, lint-free cloth.
Clean any stainless steel surfaces with a non-abrasive product specic for
stainless steel. To prevent stains, a nebulizer may also be used; though sparingly
and with moderate pressure.
THE APPLIANCE FROM THE ELECTRICAL POWER SUPPLY.
CLEAN THE APPLIANCE.
EN