Use and Care Manual

CONTROLS AND OPERATION
TURN APPLIANCE ON AND OFFTURN APPLIANCE ON AND OFF
First time start up.
Touch the ON/OFF button for 3 seconds.
The display shows the following launch screens:
Shutdown.
Touch the ON/OFF button for 3 seconds to
shutdown the unit.
Hestan logo.
Settings
Functions
Initial test
please wait.
Initial test
(lasts 3 minutes).
The display shows the Home screen with the
temperature measured from inside the various
compartments. The unit automatically starts
to cool down until reaching these factory set
temperatures.
Settings
Functions
°F
1
-
42
°F
+
As seen above, the FreshSelect
compartment is
set in the freezer mode (-1°F).
* The Home screen varies depending on
the models. See ADJUSTING VARIOUS
TEMPERATURE SETTINGS on page 15 for
details.
When the appliance is first switched on, it is
recommended to wait at least 12 hours without
opening the doors and before placing any food
inside the unit. During such period deactivate
any error message by touching the Alarm button.
Each time the unit is turned on, it goes through
a self-diagnostic procedure lasting 3 minutes
before completely starting up.
During the first startup, it will not be possible to
use the menu to modify the factory settings until
the preset temperatures have been reached.
Touch the YES icon.
Confirm shutdown
by touching YES
again.
Settings
Functions
°F
1
-
42
°F
+
When the appliance is off, there are no warning
signs that prove the unit is unplugged from the
power source (wall outlet).
Switching off for long periods.
During long absence periods, it is recommended
to switch off the appliance by touching the ON/
OFF button for 3 seconds and disconnecting the
electrical plug or shutting off the breaker at your
electrical panel.
Completely empty the appliance, clean and dry it,
and leave the doors and drawers slightly open to
prevent the formation of unpleasant odors and
mold.
Home screen*:
- Fridge compartment
+42°F
- FreshSelect
/Freezer
compartment -1°F
©2020 Hestan Commercial Corporation
13
EN