User's Manual

Aruba AP-203R Hospitality
Access Point
Startup Guide
Aruba 203R Series remote access points (AP-203R and
AP-203RP) are high-performance dual-radio wireless devices
for hospitality and branch deployments.
These access points contain a dual band 802.11ac flex-radio
and Ethernet ports to provide secure Wi-Fi. The wired Ethernet
ports located on the back of this access point allow users to
connect directly to the device when linked by an Ethernet
cable.
Package Contents
The following materials are included with this product:
 203R Series access point
 Snap-on back cover
 AC power cable
Inform your supplier if there are any incorrect, missing, or
damaged parts. To return this product, repack this unit and
other included materials into the original packaging before
returning it to the supplier.
Software
For instructions on choosing operating modes and initial
software configuration, refer to the AP Software Quick Start
Guide.
Installation
This device must be professionally installed and serviced by a
trained Aruba Certified Mobility Professional (ACMP), or similar
Aruba-certified technician.
Environmental conditions
Operating conditions:
 Temperature: 0°C to 40°C (32°F to 104°F)
 Humidity: 5% to 93% non-condensing
Storage and transport conditions:
 -40°C to 70°C (-40°F to 158°F)
Humidity: 5% to 93% non-condensing
a Hewlett Packard
Enterprise company
To install your 203R Series access point refer to the Aruba 203R
Series Remote Access Point Installation Guide by scanning the QR
code below, or visit http://support.arubanetworks.com , open
the Documentation tab, then select Hardware Installation
Guides > APs > 203R Series.
Regulatory Compliance
Aruba access points are classified as radio transmission devices,
and are subject to government regulations of the host country.
The network administrator(s) is/are responsible for ensuring
that this device operates in accordance with local/regional laws
of the host domain.Specifically, access points must use channel
assignments appropriate to the location in which the access
point will be deployed.
For a complete list of Aruba access points approved for by your
country, refer to the Aruba Downloadable Regulatory Table Release
Note by scanning the QR code below or visit
http://support.arubanetworks.com, open the Documentation
tab, then select Software User & Reference Guides > DRT
Release Notes.
The regulatory model names for the 203R Series are:
 AP-203R: APINR203
 AP-203RP: APINP203
Changes or modifications to this unit not expressly approved by
the party responsible for regulatory compliance can void the
user’s authority to operate this equipment.
FCC Statement
“Improper termination of access points installed in the United
States configured to a non-US model controller is a violation of
the FCC grant of equipment authorization. Any such willful or
intentional violation may result in a requirement by the FCC for
immediate termination of operation and may be subject to
forfeiture” (47 CFR 1.80).
For additional safety and regulatory information about this
product, refer to the Safety and Compliance Information
for Server, Storage, Power, Networking, and Rack Products
document, visit hpe.com/support/Safety-Compliance-
EnterpriseProducts and perform a search for “Enterprise Safety
and Compliance.”