User guide

High Country Tek • Electronic Solutions for Industry
March 28, 2007
© Copyright 2003, High Country Tek Company
All rights reserved. Contents subject to Change
7
Software
*Note: For detailed information on DVC61 software see the DVC Programming User Guide.
Programming Tool:
• Each Digital input can be
named (16 characters).
• Each Digital inputs’
debounce time can be set:
0 to10.24 seconds in 10 ms
increments.
• Each Digital input can be set
toggle/no toggle.
• Display Backlighting can be
changed (0-100%).
• Display Contrast can be
changed (0-100%).
• Up to 12 variables can be
programmed to display on
each DVC61 screen.
• Different screens can be
programmed to display on
each DVC61.
Program Loader Monitor:
• MAC ID (range: 0-63) Note:
every module must have a
different MAC ID
• CAN Bus Baud Rate
(125kbps, 250kbps, 500kbps)
• Default or Blank screen on
power up. Default screen
consists of High Country Tek
information.
• Default Display Backlighting
(0-100%) (Backlight on
power up)
• Default Display Contrast (0-
100%) (Contrast on power
up)
*Note: All DVC61 modules will ship from HCT with the MAC ID set to 61 and the CAN Bus
Baud Rate set to 125k unless otherwise noted.