Instruction Manual

Q511.001

2000-2002 Polaris

Magnum 325

Stage 1

For mildly tuned machines using the stock airbox with

stock or aftermarket filter. May also be used with a

good aftermarket exhaust system.

K&N Filter # N/A

1 Main Jet DJ126

1 Main Jet DJ128

1 Main Jet DJ130

1 Main Jet DJ132

1 Main Jet DJ134

1 Main Jet DJ136

1 Main Jet DJ138

1 Main Jet DJ140

1 Main Jet DJ142

1 Fuel Needle DNO466

1 Adjusting Washer DW0001

1 E-clips DE0001

Parts List

PAGE 1
Q511.001 2000-2002 Polaris Magnum 325 Stage 1 For mildly tuned machines using the stock airbox with stock or aftermarket filter. May also be used with a good aftermarket exhaust system.
PAGE 2
STAGE ONE INSTRUCTIONS Q511.001 1. Remove vacuum slide from the carb. Remove stock needle & spacers, noting order of assembly (Fig. A). 2. Install Dynojet needle on groove #4 for applications below 3000 feet, groove #3 for above 3000 feet, using all stock spacers. Install the Dynojet washer above the E-clip. 3. Remove stock main jet and replace with Dynojet main jet provided. If you are running the stock exhaust use the DJ136 below 3000 feet, DJ132 from 3000 to 6000 feet and DJ128 above 6000 feet.