User guide

High Lifter Products, Inc. [phone]
780 Professional N. Dr. Fax [phone]
Shreveport, LA 71105
Kawasaki BF 750 Rear CV Boot Covers
Components:
CV Boot Covers 2ea
6 x 30mm Bolts 4ea
6 x 40mm Bolt 2ea
6mm Flat Washer 6ea
6mm Nylock Nut 2ea
Installation:
1. To make installation easier, place the transmission in park, and with assistance stand ATV on its rear.
Installation can be done with ATV on the ground.
NOTE:
Anytime an ATV stands on its rear there is a danger of it falling. It is recommend that when
the ATV is standing on its rear that it be secured to a stable object, using a rope or ratchet strap.
2. Remove the plastic factory CV covers.
3. Install the High Lifter Rear CV Boot Covers, using the factory holes and hardware provided.
4. Use the 6mm locking nut to secure two of the bolts (one on each plate) to secure the boot to the frame.