Instructions / Assembly

For information on Care and Cleaning or to register your

highwood product, please visit www.highwood-usa.com.

PAGE 1 OF 1

IMPORTANT!

DO NOT fully tighten the nuts until all

nuts are started. Once all nuts are started,

go back & tighten all the nuts.

Retain these instructions for future reference

HARDWARE

high

wood

NATURE'S CLOSEST RIVAL



INCLUDED TOOLS

5/32" HEX KEY

Lehigh, Weatherly, or Adirondack Collection

Rectangular, Square, or Sideboard Tables

Assembly Guide

All AD-DTB/AD-CTB

08.07.2017

1/4"-20 x 3" Bolt

This assembly guide applies to all tables displayed above!

- AD-DTB37/AD-CTB37 - Rectangular 36x72 Dining or Counter Height Dining Table

- AD-DTB47/AD-CTB47 - Rectangular 42x72 Dining or Counter Height Dining Table

- AD-DTB48/AD-CTB48 - Rectangular 42x84 Dining or Counter Height Dining Table

- AD-DTB25/AD-CTB25 - 22x54 Sideboard

or Counter Height Sideboard Table

- AD-DTB44/AD-CTB44 - 42x42 Square

Dining or Counter Height Dining Table

2" Umbrella Grommet

PAGE 1
Lehigh, Weatherly, or Adirondack Collection Rectangular, Square, or Sideboard Tables Assembly Guide HARDWARE x8 A 1/4"-20 x 3" Bolt B x1 - AD-DTB25/AD-CTB25 - 22x54 Sideboard or Counter Height Sideboard Table 2" Umbrella Grommet - AD-DTB44/AD-CTB44 - 42x42 Square Dining or Counter Height Dining Table IMPORTANT! DO NOT fully tighten the nuts until all nuts are started. Once all nuts are started, go back & tighten all the nuts.
PAGE 2
Lehigh, Weatherly, or Adirondack Collection Rectangular, Square, or Sideboard Tables Assembly Guide A 1) Place the table top upside down on a soft surface. B 2) Attach leg with 2 A bolts. 3) Repeat for each leg. 4) Securely tighten all bolts, but do not over tighten. 5) If installing an umbrella, insert Umbrella Grommet B into center hole. highwood NATURE'S CLOSEST RIVAL For information on Care and Cleaning or to register your highwood product, please visit www.highwood-usa.com.