Instructions / Assembly
For information on Care and Cleaning or to Register your
highwood® product, please visit www.highwood-usa.com.
PAGE 1 OF 1
TOOLS INCLUDED
5/32" HEX KEY
IMPORTANT!
DO NOT fully tighten the bolts until all bolts are started.
Once all bolts are inserted, go back & tighten all the bolts.
Adirondack Collection
Hamilton Deck Chair
Hamilton Rocking Chair
Assembly Guide
HARDWARE INCLUDED
AD-CHDA2|AD-RKCH6
08.17.2021
A
Qty: 8
1/4"-20 x 1-1/2"
1) Insert (1) "A" Bolt into Lower Hole on
Each Side to Attach Seat to Back. Make Sure
the Back is Fully Upright. Make Bolts Snug,
but Do Not Overtighten.
ABACK
SEAT
2) With the Chair Laying on its Left Side,
Attach the Right Leg Assembly to the Seat
using (3) "A" bolts.
3) Attach Right Arm to the Back Support
Using (1) "B" Bolt.
4 Flip Chair and Lay on Right Side. Repeat
for Left Leg Assembly.
RIGHT LEG ASSEMBLY
SEAT
BACK SUPPORT
A
RIGHT ARM
Note: Arm goes on
Top of back Support
Qty: 2
B
1/4"-20 x 1-3/4"
B